![]() This, and printing with only white ink, is only available through a custom quote request and has a minimum order of 1,000. The only way to use light colours on the clear stock would be to print the background of opaque white ink and then print on top of this solid area. Therefore it is best to stick with solid vector shapes and thicker fonts in black or dark colours. Similarly, pictures or gradient effects don't have the same impact on clear as they do on opaque stocks and should be avoided. But, as the material is clear, the lighter ink coverage just doesn't show up. Light colours are usually achieved by simply putting less ink onto white paper. Printing on clear material works best with black ink or very dark colours. Are there any special file requirements for printing on the Clear Label Stock? UV coating protects the surface from moisture, wear, and fading, but does not add the same structure as Lamination. This coating is only available in Gloss and Matte and is slightly less expensive than Lamination. UV coating (sometimes called Liquid Lamination) is an oil-based liquid that coats the entire surface of the sheet and is cured by UV lights. Because it is an actual film applied to the label, it adds strength, thickness, and protection to the surface. It is readily available in Gloss and Silk, but you can have other options through custom estimates. Lamination is a thin plastic film that is bonded to the surface of the label. What is the difference between Lamination and UV coating? For additional strength and protection, lamination or UV coating can be added after printing to seal the surface. These are all made of plastic and will not break down or rub off if in contact with moisture, or be affected by oily products the way that the paper label stocks could. If the product is oil or water-based or will be used in a damp environment (like in the shower or bathroom), the best material to choose would be one of the vinyl options or the clear gloss label. ![]() Which label stock is best for oil-based products? As UV coating is oil-based, it will not work with any type of writing implement and should be avoided if the labels need to be written on. Gloss or silk lamination is also compatible with markers and certain pens, but the ink might need to dry. If the ink is too watery, it will need to dry before being handled or else it could smudge or smear. 60lb Gloss and the Vinyl options can be written on, however only with a Sharpie-style marker and certain pens. This material can be written on with pens, pencils, markers, and speciality writing devices without the ink smudging risk. The best option to choose for labels that need to be written on would be the 60lb Uncoated Label. Please visit the Roll Labels page if you want to use a labelling machine to apply the labels. They are intended for hand application for test runs, if the container is not compatible with labelling machines, or if the labels will be handed out as promo items. Can Labels (Cut to Finish Size) be used with a labelling machine?Ĭut-Sheet labels are not compatible with labelling machines. Once the label is in the proper location and stuck in place with the small exposed section of adhesive, the rest of the liner can be removed and the label smoothed onto the surface, which helps prevent crooked labels or wrinkles. This is very useful when hand applying labels, as it is much easier to position with the liner on. What does Crack and Peel mean?Ĭrack and Peel refers to the liner on the back of the label stock and means that it will have slits or scores that allow the liner to "Crack" into sections so that a small portion can be peeled off. Therefore, it is best to reach out for a custom quote, and include the shape (often called a "Die Line") so that the die inventory can be checked. As the shapes would be cut out with a die (think cookie-cutter style), it is possible that there is a die on hand in the desired shape or very similar. ![]() If Avery-style label sheets are needed, these can be requested through a custom quote. They will not be on a roll or have a certain number on a sheet. If, for example, the size ordered is 2"x3.5", the labels will be exactly 2"x3.5". Labels (Cut to Finished Size) FAQ What does "Cut to Finish Size" mean?Ĭut to Finish Size means that the labels will be provided cut down to the size that was ordered.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |